Before installation, unpack the $LINQ unit and carefully inspect it for damage.
The player arrives to you set up with two user accounts, as outlined in the table below. For more information about user accounts, refer to Understanding the User Accounts on Linux Players.
Proper security practice requires that you change the default passwords to strong passwords before deployment. For instructions, refer to Changing Passwords for the User Accounts on a Linux Player.
|Configure Player account||config||scala123#|
|Scala Player account||player||scala123#|
|1||Camera is currently not supported|
|2||Screen||1||Comes in both touch and non-touch displays. Non-touch displays are by special order.|
There are two methods for setting up $LINQ $ALL:
In order to set up the $LINQ tablet, you will need the following:
For remote setup:
vncviewer64-*.exe and connected using an Ethernet crossover cable.
the 11.6" and 15.6" $LINQ tablets have a Power Over Ethernet (POE) feature meaning that you do not have to use the power cord if using a wired Internet connection.
Once the unit is plugged in, the $LINQ player starts. If the unit does not automatically start, press the power button on the front of the device.
|Before proceeding with player configuration, ensure that you have created a player profile in $CM. See Creating a Player Profile for more information.|
To configure the player so that it is ready for playback, refer to Setting Up Linux Players.